MITS, AUTO LAB PCB Prototyping
Equipped Auto-Tool-Change and providing the superior cost performance
Auto Lab replaces Eleven Auto. This model
employs Auto-Tool-Change mechanism and achieves a low price, while its
specification exceeds Eleven Auto. Up to 10 tools are available for
automatic tool change. The standard spindle motor is made in Japan with
high quality and less runout. Tool change employs the electrical
function without using the air compressor.
Cabinet is available for optional item
Well designed and easy to perform maintenance.
Standard camera monitoring system
Magnify the surface of the board and
display on a monitor. You can easily adjust the right position while
viewing display.
(Maximum useful magnification depends on the size of the screen)
Web Video
Auto_Lab_Introduction : It is demonstration
of the process by using "Auto-tool-change"
(This site is now in the process of publication. )
Optional equipments make it even easier to process
Vacuum table The
vacuum table option employs the porous resin which holds tightly in the
whole area
of the surface.
This stabilizes the substrate tightly without causing twisting or
warpage.
AUTO LAB SPECIFICATION
| Model |
|
|
|---|---|---|
| Minimum pattern width (mm) | 0.1 (4 mil) | |
| Minimum milling width (mm) | 0.1 (4 mil) | |
| Working area (X/Y/Z) (mm) | 229 x 310 x 57 (9.0" x 12.2" x 2.24") | |
| Table size (mm) | 296 x 370 (11.6" x 14.5") | |
| Control axis | X, Y, Z | |
| Control motor | Stepper Motor | |
| Resolution (µm) *3 | 0.156 (0.00614 mil) | |
| Maximum Travel Speed (mm/sec.) *1 | 55 (2.17") | |
|
Spindle speed (min-1) Spindle motor |
5,000 - 62,000 DC Brushless Spindle |
|
| Drilling (mm) | 0.2 - 3.175 (8 - 125 mil) | |
| Maximum drilling cycle (cycles/min.) *2 | 50 | |
| Maximum thickness of processed material (mm) *4 | 10 (0.4") | |
| Tool change | Automatic / 10 | |
| Milling method | Absolute | No |
| Incremental | Yes | |
| Compressed air (Mpa) | --- | |
| Power consumption | 100 - 240 V, 50-60 Hz, 200VA | |
|
Machine dimensions W x D x H (mm) |
435 x 575 x 430 (17.2" x 23" x 17") With cabinet: 462 x 575 x 467 (18.2" x 23" x 19") |
|
| Machine weight (kg) |
Approx. 34 (76 lbs) With cabinet: Approx. 44 (99 lbs) |
|
| Interface | One USB or one RS-232C port | |
| Standard equipement |
Fiducial positioning camera (USB)*5 10 Pieces Auto Tool Change Software: EASY CAD, Conversion & CAM |
|
|
Starter kit (Optiion) |
Connecting Cable (RS232C / USB) Magnifying glass 10x Extention hose for Vacuum cleaner Tools : End Mills, Drill Bit, Router Bit |
|
*1 Optimum
speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 The smallest traveling figures for ordering each 3 axes movement.
They do not represent the accuracy of axis positioning.
*4 Value of the thickness of the material on the work table.
This value does not show the maximum drilling stroke.
*5 Maximum useful magnification depends on the size of the screen.
FP-21T
AUTO LAB
ELEVEN LAB