MITS, ELEVEN LAB PCB Prototyping
Low-cost, wide range table size, XYZ
triple-axes control, high resolution,
standard camera monitoring system
Suitable for processing normal substrate
boards up to approximately A4 size (297mm x 210mm).
Standard camera monitoring system
Magnify the surface of the board and display on a monitor.
You can easily adjust the right position while viewing display.
(Maximum useful magnification depends on the size of the screen)
ELEVEN LAB SPECIFICATION
| Model |
|
|
|---|---|---|
| Minimum pattern width (mm) | 0.1 (4 mil) | |
| Minimum milling width (mm) | 0.1 (4 mil) | |
| Working area (X/Y/Z) (mm) | 229 x 320 x 57 (9.0" x 12.6" x 2.24") | |
| Table size (mm) | 296 x 396 (11.6" x 15.6") | |
| Control axis | X, Y, Z | |
| Control motor | Stepper Motor | |
| Resolution (µm) *3 | 0.625 (0.0246 mil) | |
| Maximum Travel Speed (mm/sec.) *1 | 55 (2.17") | |
|
Spindle speed (min-1) Spindle motor |
5,000 - 41,000 DC Spindle |
|
| Drilling (mm) | 0.2 - 3.175 (8 - 125 mil) | |
| Maximum drilling cycle (cycles/min.) *2 | 50 | |
| Maximum thickness of processed material (mm) *4 | 10 (0.4") | |
| Tool change | Lever action clamp | |
| Tool change | Lever action clamp | |
| Milling method | Absolute | No |
| Incremental | Yes | |
| Compressed air (Mpa) | --- | |
| Power consumption | 100 - 240 V, 50-60 Hz, 150VA | |
|
Machine dimensions W x D x H (mm) |
435 x 575 x 430 (17.2" x 23" x 17") With cabinet: 462 x 575 x 467 (18.2" x 23" x 19") |
|
| Machine weight (kg) |
Approx. 28 (62 lbs) With cabinet: Approx. 38 (84 lbs) |
|
| Interface | One USB or one RS-232C port | |
| Standard equipement |
Fiducial positioning camera (USB)*5 Software: EASY CAD, Conversion & CAM |
|
| Options and accessories |
Cabinet Software: Correct DXF Vacuum cleaner Video manual |
|
|
Starter kit (Optiion) |
Connecting Cable (RS232C / USB) Magnifying glass 10x Extention hose for Vacuum cleaner Tools : End Mills, Drill Bit, Router Bit |
|
*1 Optimum
speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 The smallest traveling figures for ordering each 3 axis movement.
They do not represent the accuracy of axis positioning.
*4 Value of the thickness of the material on the work table.
This value does not show the maximum drilling stroke.
*5 Maximum useful magnification depends on the size of the screen
FP-21T
AUTO LAB
ELEVEN LAB