MITS, FP-21T Precision PCB Prototyping
Low vibration and high rigidity machine design
FP-21T Precision employs small degree of runout spindle motor as well as low center of gravity and high rigidity designing. This is the ideal model for the microfabrication.
We achieved the 50µm line and space for milling processing
In order to process with the fine and
fragile tools, we elaborated the Z axis control. This enabled us to
accomplish the 50 µm line and space for the first time in the world as
the desktop PCB prototyping machine. Compared with the laser machine,
FP-21T Precision is superior in cost performance.
Optional equipment makes it even more accurate processing. The vacuum table made of the porous ceramics enables you to process substrate board whose thickness is less than 200µm.
FP-21T SPECIFICATION
| Model |
|
|
|||
|---|---|---|---|---|---|
| Minimum pattern width (mm) | 0.1 (4 mil) | 0.05 (2 mil) | |||
| Minimum millig width (mm) | 0.1 (4 mil) | 0.05 (2 mil) | |||
| Working area (mm) | 350 x 250 (14" x 10") | 150 x 150 (6" x 6") | |||
| Control axis | X, Y, Z | ||||
| Control motor | 5 phase stepper motor | ||||
| Resolution (µm) *4 | 4 (0.16 mil) | 1 (0.04 mil) | |||
| Maximum millig speed (mm/sec.) *1 | 50 (2.0") |
60 (2.4") |
|||
| Travel speed (mm/sec.) *2 | 80 (3.2") | 60 (2.4") | |||
|
Spindle speed (min-1) Spindle motor |
5,000 - 40,000 (model 40/U) 5,000 - 60,000 (model 60) 5,000 - 100,000 (model 100) |
5,000 - 40,000 Dynamic runout: less than 10µm DC Spindle |
|||
| Drilling (mm) | 0.2 - 3.175 (8 - 125 mil) | 0.05 - 3.175 (2 - 125 mil) | |||
| Maximum drilling cycle (cycles/min) *2 | 80 | ||||
| Maximum drilling stroke (mm) | 30 (1.18 mil) | ||||
| Tool change | Collet chuck | ||||
|
Milling method |
Absolute | Manual switching | |||
|
Incremental - Pressure foot - Non-contact |
Yes Yes FP-21T HP |
Yes -------- Yes (Air) |
|||
| Compressed air (Mpa) | 0.5 (required for HP type) | 0.5 | |||
| Power consumption | 250VA | 250VA | |||
|
Machine dimensions W x D x H (mm) |
620 x 505 x 420 (24" x 20" x 17") |
Machine: 415 x 456 x 375 (16" x 20" x 15") Controller: 125 x 235 x 305 (5" x 9" x 12") |
|||
| Machine weight (kg) | Approx. 42 (93 lbs) |
Machine: 36 kg (80 lbs) Controller: 4 kg (91 lbs) |
|||
| Features | High precision, high rigidity, ideal for teflon circuit board | Ultra-high precision, high rigidity, ideal for high-frequency circuits | |||
| Vacuum table (option) | VT-ABS | VTP-CRM | |||
| Fiducial camera (option) | Yes | Yes | |||
FP-21T
ELEVEN AUTO
SEVEN MINI